Waterborne acrylic primer with very good adhesion. Suitable for absorbent substrates such as sandy cement screeds or non-monolithic finished concrete.One of the best primers to use directly under a Cementitious SL- or Alhpa SL system. Also has good adhesion strength on ceramic tiles and can be used as dust binder under synthetic resin bound gravel floors. Packaging: Bucket 10 kg.
Consumption 100-150 g per m2.
Dilute with water, see TDS for primer/water ratio.
Primer FST is a one-component, fast drying water-based acrylate primer, suitable for use under cement-based products. This primer has good adhesion and is very suitable for use on absorbent substrates and ceramic tiles.
Ready-to-use waterborne acrylic primer that penetrates well into porous substrates. Suitable for absorbent substrates such as sand cement screeds or non-monolithic finished concrete. Packaging: 10 kg jerrycan or 20 kg jerrycan
A solvent-free two component epoxy with approximately 100% solids content for good adhesion to normal to highly absorbent substrates. Recommended for cement-bound screeds.
The Primer BHH can also be filled with Microdol A100 and used as a scraper coat.
To be used as:
- Primer
- Scrap coats
- Binder for quartz carpet/mortar
Primer DPM is a 2-component, solvent-free, epoxy primer which
can be used as a moisture barrier on clean, waterproof, stony surfaces.
Quartzline Primer DPM is applied at a residual moisture content of 3 to 6%.
Not suitable for floors with rising damp.
The coating is applied in two layers in order to guarantee a good seal.
Quartzline Primer GW is a two-component water-based epoxy primer with excellent adhesion.
Very suitable for non to low absorbing substrates such as:
- New concrete floors
- Cementitious screeds
- Cured concrete floors
- Existing epoxy and polyurethane screeds and coatings
- Hard baked and glazed tiles
- Ceramic tiles
DE
EN
FR
NL
