Quartzline Primer GW is a two-component water-based epoxy primer with excellent adhesion.
Very suitable for non to low absorbing substrates such as:
- New concrete floors
- Cementitious screeds
- Cured concrete floors
- Existing epoxy and polyurethane screeds and coatings
- Hard baked and glazed tiles
- Ceramic tiles
Primer PU BHH is a solvent-free two-component polyurethane primer, characterized by an approximately 100% solids content and very good adhesion to normal to highly absorbent surfaces. It is the preferred primer for cement-based screed floors.
A solvent-free two component epoxy with approximately 100% solids content for good adhesion to normal to highly absorbent substrates. Recommended for cement-bound screeds.
The Primer BHH can also be filled with Microdol A100 and used as a scraper coat.
To be used as:
- Primer
- Scrap coats
- Binder for quartz carpet/mortar
Primer DPM is a 2-component, solvent-free, epoxy primer which
can be used as a moisture barrier on clean, waterproof, stony surfaces.
Quartzline Primer DPM is applied at a residual moisture content of 3 to 6%.
Not suitable for floors with rising damp.
The coating is applied in two layers in order to guarantee a good seal.
Europox Z speed is a solvent-free two-component epoxy primer. Europox Z speed has excellent adhesion qualities for normal to highly absorbent porous substrates and is the recommended primer for porous cement-bound substrates such as concrete and cement screeds.
Europox Z speed has a very fast drying time of approx. 2 hours (depending on conditions).
DE
EN
FR
NL
