Polyurethane

Coating PU MG cannot be used on SL-PU UV or SL-PU D30! Quartzline Coating PU MG Matt is a two-component, water-based, transparent topcoat on a polyurethane base. The coating gives a matt finish and has a high surface hardness. The coating is easy to apply, without lapping and roller tracks and has a very good mechanical resistance. The stain resistance is also at a high level. Ideal for warehouses, logistics areas and workshops.

Quartzline Coating PU MG Satin Gloss is a two-component, waterborne, transparent polyurethane-based topcoat. The coating gives a silk gloss finish and high surface hardness. The coating is easy to apply without deposits and roller tracks and has very good mechanical resistance. Stain resistance is also at a high level. Ideal for industrial halls, logistics areas and workshops. Use 3% to 5% Quartzline “Antislip KFU” to obtain an antiskid layer. The Quartzline Coating PU MG silk gloss is extremely easy to clean, the extremely tight surface prevents dirt from adhering. All high-gloss coatings will eventually become silk-gloss through daily use. Matte coatings do the opposite, intensive use creates a polished effect that causes the coating to become silk gloss on the most used pieces. In the long run, a silk-gloss coating is always easier to clean and lasts longer than a matte or high-gloss coating.

Quartzline coating PU SG Coloured is a two-component, water-based, coloured silk gloss topcoat on a polyurethane base. This coating has very good wear resistance, but also a very low VOC content, which means it meets the high standards of the German AgBB. For many years, this coating has been used in combination with Quartzline SL-PU D60. This famous combination excels in wear resistance and hardness. This coloured topcoat provides a UV-resistant finish on the yellowing Quartzline SL-PU D60. Ideal for areas such as laboratories, offices, corridors, canteens, schools, hospitals, showrooms, museums, town halls, etc. A characteristic of the smooth coating is that it has bacteriostatic properties, which means that micro-organisms cannot multiply on Quartzline Coating PU SG Coloured. For this reason, this coating is often used in hospitals and laboratories. Use 3% to 5% Quartzline "Antislip KFU" to obtain an antiskid layer.

Quartzline Coating PU SG NF Matt is a two-component, waterborne, transparent matt topcoat based on polyurethane. This coating has very good wear resistance and a very low solvent content, and meets the high standards of the German AgBB. For many years, this coating has been used with Quartzline SL-PU D30 and Quartzline SL-PU UV. This renowned combination scores high points for wear resistance and hardness. This topcoat is filled with UV absorbers and delays the yellowing of the already quite UV-resistant Quartzline SL-PU D30. A characteristic of the smooth coating is that it has bacteriostatic properties, which means that micro-organisms cannot multiply on the Quartzline Coating PU SG NF Matt. For this reason, this coating is often used in hospitals and laboratories. Use 3% to 5% Quartzline "Antislip KFU" to obtain an antiskid layer.

Quartzline Coating PU SG NF Satin Gloss is a two-component, water-based, transparent silk gloss topcoat on a polyurethane base. This coating has very good wear resistance and a very low solvent content, and meets the high standards of the German AgBB. For many years, this coating has been used with Quartzline SL-PU D30 and Quartzline SL-PU UV. This renowned combination scores high points for wear resistance and hardness. This topcoat is filled with UV absorbers and delays the yellowing of the already quite UV-resistant Quartzline SL-PU D30. A characteristic of the smooth coating is that it has bacteriostatic properties, which means that micro-organisms cannot multiply on the Quartzline Coating PU SG NF Satin Gloss. For this reason, this coating is often used in hospitals and laboratories. Use 3% to 5% Quartzline "Antislip KFU" to obtain an antiskid layer.

Quartzline Coating PU TR is a two-component, water-based, transparent silk gloss coating on a polyurethane base. The coating is easy to apply, without lapping and roller tracks. The hardened coating is very stain and tyre resistant. The varying quality of rubber tyres makes it impossible to give a full guarantee on tyre resistance. However, we have tested various renowned and less renowned brands, all with positive results. Ideal for industrial halls, logistics areas and workshops. Use 3% to 5% Quartzline "Antislip KFU" to obtain an antiskid layer. The coating is slow drying, dust dry after 24 hours and can be walked on after two days.