EN
FR
NL
PL
CONSTRUCT Cementitious LCS
A mechanically manufactured liquid cement-based mortar to make floor screeds.
CONSTRUCT Cementitious LCS
Adapt your system
Your floor
A mechanically manufactured liquid cement-based mortar to make floor screeds.
Quartzline Cementitious LCS is a mechanically manufactured liquid cement-based mortar to make floor screeds. Cementitious LCS complies with the NEN-EN 13813 standard for floor mortar and floor screeds. It can be applied with layer thicknesses from 30mm. Strength class CT-C16-F3.
This renovation screed is easy to process and flows very well. This material requires only minimum levelling out.
System explanation
The primer for floors, such as cement screeds, anhydrite floors, cement-bound screeds, gypsum screeds, must penetrate deep into the substrate. Do this by diluting the Primer Universal with water in the mixing ratio 1 part primer with 3 parts water. For a closed substrate such as a tiled floor, start directly with Primer Universal without diluting.
It is essential to apply sufficient primer. This prevents cracks and too fast drying of the levelling mortar.
.png)
Ideal for:
Disclaimer
Despite the fact that this calculation system has been carefully compiled, no rights can be derived from the outcome. These calculations are performed on the basis of a number of general principles. The results of the calculations are only an indication. This is because the applicable circumstances for the project concerned for which the order applies cannot be taken into account.